The LCA301 Anemometer Kit enables on-site measurements to be taken and air volumes calculated for balancing and commissioning ventilation systems.
Note: This unit is un-calibrated. UKAS certificate of calibration must be purchased separately using part number: 90000382 found here. The addition of a UKAS certificate of calibration will mean a minimum of 2 additional weeks lead time.
Main Features:
-
Compliant to the testing requirements of the Domestic Ventilation Compliance Guide 2010
-
Aerodynamic design
-
Volume flow in m3/hr and l/sec
-
Self sealing for leak tight readings
-
Tough ABS to take knocks on-site
-
2 Year Warranty
Benefits
-
Converts 100mm Vane Anemometer into a flow Meter
-
Inexpensive measuring achieved
-
Proportional balancing made really easy
-
Suitable for extract and supply grilles and air valves
Supplied with the LCA301 is a 285 x 235mm Aircone to attach to the vane sensor. Aircone flow hoods are the quick and accurate method to maximise the usefulness of the Airflow Anemometer.
Balancing and Commissioning of air volume flow is immediately possible at grilles, diffusers, and air valves. The hood is equally suitable for measuring ventilation flow rates for both extract and supply air.
Simply rotate the vane sensor 180o to point into the direction of flow. Manufactured in hard wearing ABS for the rigours of on-site use, is extremely lightweight allowing one man operation for long periods and one handed testing up ladders etc. Both the instrument and the aircone is supplied in a protective carry-case.Commision fan to installation requirements.
Operation
-
Hand held air flow measurement
-
Read at Grilles and Air Valves
-
Supply or extract
-
Displays l/sec, m3/hr or velocity m/sec
-
Supplied with 285 x 235mm Aircone
-
Case, Battery and included
LCA301 Kit comprises of: LCA301 Anemometer 1 off Rectangular Aircone 285 x 235mm Protective carry-case
