Products
>
Products
A quick and easy to fit system of semi-rigid ducting (Ø75mm (OD) 63mm (ID) x 50M roll in red) that can result in up to 70% time saving during the on-site installation process, compared to rigid or spiral duct methods.
KEY FEATURES:
- The pipes lining is made from new raw material (not recycled) and is anti-static, non-porous and odourless, this lining helps reduce dirt deposits and has other characteristics such as low air-flow resistance and has high sound absorption
- The round 75mm pipe takes 8 Kilonewton’s per square metre of pressure to crush it, therefore will stand most household items that are thrown onto it in loft spaces. It can even be buried in up to 3 metres of concrete
- Access panels on the distribution boxes so that the ducting system can be easily cleaned out. (As required and stated in the 2010 Domestic Ventilation Compliance Guide)
- No noise transfer (talking, music etc) between rooms (As required and stated in the 2010 Domestic Ventilation Compliance Guide)
- No noise generated by high volumes of air being pushed or sucked down ducting (common with branch systems)
- No joins in ducting so it cannot become dislodged if knocked or disturbed e.g., in loft spaces
- Quicker and easier to install compared to traditional branch systems
- Bespoke insulation available for unheated areas
- Metal attenuated (noise absorbing) distribution boxes – very robust and durable, various sizes
- Also available in blue, to distinguish between supply and extract air on mechanical heat recovery ventilation systems. See part number: 90001379
To ensure the best results, we recommend the innovative AIRFLEXPRO semi-rigid ducting system to be used with AIRFLEX ISO insulated ducting system.
TECHNICAL SPECIFICATION:
- Inner Diameter: 63mm
- Outer Diameter: 75mm
- Duct Thickness: 6mm
- Max allowed air volume: 30m3/h
- Max allowed air Velocity: 2.7m/s
- Max pressure drop allowed: 3pa/m
- Noise Absorption: >15 dB
- Material: Outside PE-HD, Inside PE-LD
- Fire Rating: B2, normally inflammable to DIN EN1610
- Crushability: 8kN/m2
- Operation temperature: -5C to 90C
- Length per coil: 50M