Ø78mm Straight Wall Plenum for AirflexPro Semi-rigid Ducting systems
The product is a wall mounted plenum made from galvanised sheet steel. A plenum is used to connect an AirflexPro duct to a valve. These plenums make life easy and can be cut down to the required size to fit in any ceiling or wall. These products are a vital part of the AirflexPro range, which has clean and efficient air movement at its core. Hygienic dust caps come fitted inside the spigots to protect the plenum from contamination while on site.
These hygienic caps should only be removed once the valve is fitted. It is vitally important that the interior of the plenum remains free from dirt which is a common problem with products that don’t have hygienic caps. Combined with the safe lining inside the duct, mechanical locking to prevent leakage, AirflexPro can remain the ducting range that focuses on air quality and attention to detail.
2 x spigots for 75mm ducting and one spigot (nominal diameter 125mm) for an extract or supply air valve
Max. air volume 40-60 m3/h (11.1 l/s - 16.6 l/s) air volumes dependent on valve type installed
1 x Ø125mm hygienic cap included
Safe connection using standard AirflexPro mechanical locking system
Guaranteed to reduce potential leakage issues compared to rigid ducting
Versatile installation positions and durable material